Once-only subpatterns

With both maximizing and minimizing repetition, failure of what follows normally causes the repeated item to be re-evaluated to see if a different number of repeats allows the rest of the pattern to match. Sometimes it is useful to prevent this, either to change the nature of the match, or to cause it fail earlier than it otherwise might, when the author of the pattern knows there is no point in carrying on.

Consider, for example, the pattern \d+foo when applied to the subject line 123456bar

After matching all 6 digits and then failing to match "foo", the normal action of the matcher is to try again with only 5 digits matching the \d+ item, and then with 4, and so on, before ultimately failing. Once-only subpatterns provide the means for specifying that once a portion of the pattern has matched, it is not to be re-evaluated in this way, so the matcher would give up immediately on failing to match "foo" the first time. The notation is another kind of special parenthesis, starting with (?> as in this example: (?>\d+)bar

This kind of parenthesis "locks up" the part of the pattern it contains once it has matched, and a failure further into the pattern is prevented from backtracking into it. Backtracking past it to previous items, however, works as normal.

An alternative description is that a subpattern of this type matches the string of characters that an identical standalone pattern would match, if anchored at the current point in the subject string.

Once-only subpatterns are not capturing subpatterns. Simple cases such as the above example can be thought of as a maximizing repeat that must swallow everything it can. So, while both \d+ and \d+? are prepared to adjust the number of digits they match in order to make the rest of the pattern match, (?>\d+) can only match an entire sequence of digits.

This construction can of course contain arbitrarily complicated subpatterns, and it can be nested.

Once-only subpatterns can be used in conjunction with lookbehind assertions to specify efficient matching at the end of the subject string. Consider a simple pattern such as abcd$ when applied to a long string which does not match. Because matching proceeds from left to right, PCRE will look for each "a" in the subject and then see if what follows matches the rest of the pattern. If the pattern is specified as ^.*abcd$ then the initial .* matches the entire string at first, but when this fails (because there is no following "a"), it backtracks to match all but the last character, then all but the last two characters, and so on. Once again the search for "a" covers the entire string, from right to left, so we are no better off. However, if the pattern is written as ^(?>.*)(?<=abcd) then there can be no backtracking for the .* item; it can match only the entire string. The subsequent lookbehind assertion does a single test on the last four characters. If it fails, the match fails immediately. For long strings, this approach makes a significant difference to the processing time.

When a pattern contains an unlimited repeat inside a subpattern that can itself be repeated an unlimited number of times, the use of a once-only subpattern is the only way to avoid some failing matches taking a very long time indeed. The pattern (\D+|<\d+>)*[!?] matches an unlimited number of substrings that either consist of non-digits, or digits enclosed in <>, followed by either ! or ?. When it matches, it runs quickly. However, if it is applied to aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa it takes a long time before reporting failure. This is because the string can be divided between the two repeats in a large number of ways, and all have to be tried. (The example used [!?] rather than a single character at the end, because both PCRE and Perl have an optimization that allows for fast failure when a single character is used. They remember the last single character that is required for a match, and fail early if it is not present in the string.) If the pattern is changed to ((?>\D+)|<\d+>)*[!?] sequences of non-digits cannot be broken, and failure happens quickly.

Hier Kannst Du einen Kommentar verfassen


Bitte gib mindestens 10 Zeichen ein.
Wird geladen... Bitte warte.
* Pflichtangabe
Es sind noch keine Kommentare vorhanden.

PHP cURL-Tutorial: Verwendung von cURL zum Durchführen von HTTP-Anfragen

cURL ist eine leistungsstarke PHP-Erweiterung, die es Ihnen ermöglicht, mit verschiedenen Servern über verschiedene Protokolle wie HTTP, HTTPS, FTP und mehr zu kommunizieren. ...

TheMax

Autor : TheMax
Kategorie: PHP-Tutorials

Midjourney Tutorial - Anleitung für Anfänger

Über Midjourney, dem Tool zur Erstellung digitaler Bilder mithilfe von künstlicher Intelligenz, gibt es ein informatives Video mit dem Titel "Midjourney Tutorial auf Deutsch - Anleitung für Anfänger" ...

Mike94

Autor : Mike94
Kategorie: KI Tutorials

Grundlagen von Views in MySQL

Views in einer MySQL-Datenbank bieten die Möglichkeit, eine virtuelle Tabelle basierend auf dem Ergebnis einer SQL-Abfrage zu erstellen. ...

admin

Autor : admin
Kategorie: mySQL-Tutorials

Tutorial veröffentlichen

Tutorial veröffentlichen

Teile Dein Wissen mit anderen Entwicklern weltweit

Du bist Profi in deinem Bereich und möchtest dein Wissen teilen, dann melde dich jetzt an und teile es mit unserer PHP-Community

mehr erfahren

Tutorial veröffentlichen

How to overcome Safari's iframe cookie block?

For data exchange between domains, think about utilizing local storage, but be mindful of any possible drawbacks. Perhaps more reliable are server ...

Geschrieben von eugenecohen am 26.11.2024 03:17:31
Forum: HTML, JavaScript, AJAX, jQuery, CSS, Bootstrap, LESS
Ein data POST via Curl funktioniert nicht.

Anmorg93 Respekt, du bist ja nur um rund 10 Jahre zu spät dran.

Geschrieben von scatello am 21.11.2024 10:57:00
Forum: PHP Developer Forum
Ein data POST via Curl funktioniert nicht.

Hey, hatte auch mal das Problem. Oft liegt’s an fehlenden oder falschen Headern. Probier mal:​ $ch = curl_init(); curl_setopt($ch, CURLOPT_UR ...

Geschrieben von Anmorg93 am 21.11.2024 10:48:17
Forum: PHP Developer Forum
Probleme mit einem Linux-Befehl...

guten Tag liebe Community ;) hallo liebe Freunde auf der php-Ressource, hoffe, das landet im richtigen Unterforum also, womit ich im Moment zu ...

Geschrieben von dhubs am 15.11.2024 16:21:52
Forum: Off-Topic Diskussionen