The Ev class

(PECL ev >= 0.2.0)

Einführung

Ev is a static class providing access to the default loop and to some common operations.

Klassenbeschreibung

final class Ev {

/* Constants */

const int FLAG_AUTO = 0;

const int FLAG_NOENV = 16777216;

const int FLAG_FORKCHECK = 33554432;

const int FLAG_NOINOTIFY = 1048576;

const int FLAG_SIGNALFD = 2097152;

const int FLAG_NOSIGMASK = 4194304;

const int RUN_NOWAIT = 1;

const int RUN_ONCE = 2;

const int BREAK_CANCEL = 0;

const int BREAK_ONE = 1;

const int BREAK_ALL = 2;

const int MINPRI = -2;

const int MAXPRI = 2;

const int READ = 1;

const int WRITE = 2;

const int TIMER = 256;

const int PERIODIC = 512;

const int SIGNAL = 1024;

const int CHILD = 2048;

const int STAT = 4096;

const int IDLE = 8192;

const int PREPARE = 16384;

const int CHECK = 32768;

const int EMBED = 65536;

const int CUSTOM = 16777216;

const int ERROR = 2147483648;

const int BACKEND_SELECT = 1;

const int BACKEND_POLL = 2;

const int BACKEND_EPOLL = 4;

const int BACKEND_KQUEUE = 8;

const int BACKEND_DEVPOLL = 16;

const int BACKEND_PORT = 32;

const int BACKEND_ALL = 63;

const int BACKEND_MASK = 65535;

/* Methoden */

final public static backend(): int

final public static depth(): int

final public static embeddableBackends(): int

final public static feedSignal( int $signum ): void

final public static feedSignalEvent( int $signum ): void

final public static iteration(): int

final public static now(): float

final public static nowUpdate(): void

final public static recommendedBackends(): int

final public static resume(): void

final public static run( int $flags = ?): void

final public static sleep( float $seconds ): void

final public static stop( int $how = ?): void

final public static supportedBackends(): int

final public static suspend(): void

final public static time(): float

final public static verify(): void

}

Vordefinierte Konstanten

Flags passed to create a loop:

Ev::FLAG_AUTO

The default flags value

Ev::FLAG_NOENV

If this flag used(or the program runs setuid or setgid), libev won't look at the environment variable LIBEV_FLAGS . Otherwise(by default), LIBEV_FLAGS will override the flags completely if it is found. Useful for performance tests and searching for bugs.

Ev::FLAG_FORKCHECK

Makes libev check for a fork in each iteration, instead of calling EvLoop::fork() manually. This works by calling getpid() on every iteration of the loop, and thus this might slow down the event loop with lots of loop iterations, but usually is not noticeable. This flag setting cannot be overridden or specified in the LIBEV_FLAGS environment variable.

Ev::FLAG_NOINOTIFY

When this flag is specified, libev won't attempt to use the inotify API for its » ev_stat watchers. The flag can be useful to conserve inotify file descriptors, as otherwise each loop using ev_stat watchers consumes one inotify handle.

Ev::FLAG_SIGNALFD

When this flag is specified, libev will attempt to use the signalfd API for its » ev_signal (and » ev_child ) watchers. This API delivers signals synchronously, which makes it both faster and might make it possible to get the queued signal data. It can also simplify signal handling with threads, as long as signals are properly blocked in threads. Signalfd will not be used by default.

Ev::FLAG_NOSIGMASK

When this flag is specified, libev will avoid to modify the signal mask. Specifically, this means having to make sure signals are unblocked before receiving them.

This behaviour is useful for custom signal handling, or handling signals only in specific threads.

Flags passed to Ev::run() , or EvLoop::run()

Ev::RUN_NOWAIT: Means that event loop will look for new events, will handle those events and any already outstanding ones, but will not wait and block the process in case there are no events and will return after one iteration of the loop. This is sometimes useful to poll and handle new events while doing lengthy calculations, to keep the program responsive.
Ev::RUN_ONCE: Means that event loop will look for new events (waiting if necessary) and will handle those and any already outstanding ones. It will block the process until at least one new event arrives (which could be an event internal to libev itself, so there is no guarantee that a user-registered callback will be called), and will return after one iteration of the loop.

Flags passed to Ev::stop() , or EvLoop::stop()

Ev::BREAK_CANCEL: Cancel the break operation.
Ev::BREAK_ONE: Makes the innermost Ev::run() (or EvLoop::run() ) call return.
Ev::BREAK_ALL: Makes all nested Ev::run() (or EvLoop::run() ) calls return.

Watcher priorities:

Ev::MINPRI: Minimum allowed watcher priority.
Ev::MAXPRI: Maximum allowed watcher priority.

Bit masks of (received) events:

Ev::READ: The file descriptor in the EvIo watcher has become readable.
Ev::WRITE: The file descriptor in the EvIo watcher has become writable.
Ev::TIMER: EvTimer watcher has been timed out.
Ev::PERIODIC: EvPeriodic watcher has been timed out.
Ev::SIGNAL: A signal specified in EvSignal::__construct() has been received.
Ev::CHILD: The pid specified in EvChild::__construct() has received a status change.
Ev::STAT: The path specified in EvStat watcher changed its attributes.
Ev::IDLE: EvIdle watcher works when there is nothing to do with other watchers.
Ev::PREPARE: All EvPrepare watchers are invoked just before Ev::run() starts. Thus, EvPrepare watchers are the last watchers invoked before the event loop sleeps or polls for new events.
Ev::CHECK: All EvCheck watchers are queued just after Ev::run() has gathered the new events, but before it queues any callbacks for any received events. Thus, EvCheck watchers will be invoked before any other watchers of the same or lower priority within an event loop iteration.
Ev::EMBED: The embedded event loop specified in the EvEmbed watcher needs attention.
Ev::CUSTOM: Not ever sent(or otherwise used) by libev itself, but can be freely used by libev users to signal watchers (e.g. via EvWatcher::feed() ).
Ev::ERROR: An unspecified error has occurred, the watcher has been stopped. This might happen because the watcher could not be properly started because libev ran out of memory, a file descriptor was found to be closed or any other problem. Libev considers these application bugs. See also » ANATOMY OF A WATCHER

Backend flags:

Ev::BACKEND_SELECT: select(2) backend
Ev::BACKEND_POLL: poll(2) backend
Ev::BACKEND_EPOLL: Linux-specific epoll(7) backend for both pre- and post-2.6.9 kernels
Ev::BACKEND_KQUEUE: kqueue backend used on most BSD systems. EvEmbed watcher could be used to embed one loop(with kqueue backend) into another. For instance, one can try to create an event loop with kqueue backend and use it for sockets only.
Ev::BACKEND_DEVPOLL: Solaris 8 backend. This is not implemented yet.
Ev::BACKEND_PORT: Solaris 10 event port mechanism with a good scaling.
Ev::BACKEND_ALL: Try all backends(even currupted ones). It's not recommended to use it explicitly. Bitwise operators should be applied here(e.g. Ev::BACKEND_ALL & ~ Ev::BACKEND_KQUEUE ) Use Ev::recommendedBackends() , or don't specify any backends at all.
Ev::BACKEND_MASK: Not a backend, but a mask to select all backend bits from flags value to mask out any backends(e.g. when modifying the LIBEV_FLAGS environment variable).

Hinweis:
For the default loop during module initialization phase Ev registers » ev_loop_fork call by means of pthread_atfork (if available).

Hinweis:
There are methods providing access to the default event loop in Ev class(e.g. Ev::iteration() , Ev::depth() etc.) For custom loops (created with EvLoop::__construct() ) these values may be accessed via corresponding properties and methods of the EvLoop class.

The instance of the default event loop itself can be fetched by means of EvLoop::defaultLoop() method.

Inhaltsverzeichnis

Ev::backend — Returns an integer describing the backend used by libev
Ev::depth — Returns recursion depth
Ev::embeddableBackends — Returns the set of backends that are embeddable in other event loops
Ev::feedSignal — Feed a signal event info Ev
Ev::feedSignalEvent — Feed signal event into the default loop
Ev::iteration — Return the number of times the default event loop has polled for new events
Ev::now — Returns the time when the last iteration of the default event loop has started
Ev::nowUpdate — Establishes the current time by querying the kernel, updating the time returned by Ev::now in the progress
Ev::recommendedBackends — Returns a bit mask of recommended backends for current platform
Ev::resume — Resume previously suspended default event loop
Ev::run — Begin checking for events and calling callbacks for the default loop
Ev::sleep — Block the process for the given number of seconds
Ev::stop — Stops the default event loop
Ev::supportedBackends — Returns the set of backends supported by current libev configuration
Ev::suspend — Suspend the default event loop
Ev::time — Returns the current time in fractional seconds since the epoch
Ev::verify — Performs internal consistency checks(for debugging)